HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 255

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

The following three kinds of operation can be used on the OC address array:
1. OC address array read
2. OC address array write (non-associative)
3. OC address array write (associative)
The tag, U bit, and V bit are read into the data field from the OC entry corresponding to the
entry set in the address field. In a read, associative operation is not performed regardless of
whether the association bit specified in the address field is 1 or 0.
The tag, U bit, and V bit specified in the data field are written to the OC entry corresponding to
the entry set in the address field. The A bit in the address field should be cleared to 0.
When a write is performed to a cache line for which the U bit and V bit are both 1, after write-
back of that cache line, the tag, U bit, and V bit specified in the data field are written.
When a write is performed with the A bit in the address field set to 1, the tag stored in the entry
specified in the address field is compared with the tag specified in the data field. If the MMU
is enabled at this time, comparison is performed after the virtual address specified by data field
bits [31:10] has been translated to a physical address using the UTLB. If the addresses match
and the V bit is 1, the U bit and V bit specified in the data field are written into the OC entry.
In other cases, no operation is performed. This operation is used to invalidate a specific OC
entry. If the OC entry U bit is 1, and 0 is written to the V bit or to the U bit, write-back is
performed. If a UTLB miss occurs during address translation, or the comparison shows a
mismatch, an exception is not generated, no operation is performed, and the write is not
executed. If a data TLB multiple hit exception occurs during address translation, processing
switches to the data TLB multiple hit exception handling routine.
Address field
Data field
31
31
U
Figure 7.7 Memory-Mapped OC Address Array
V
A
1 1 1 1 0 1 0 0
: Validity bit
: Dirty bit
: Association bit
: Reserved bits (write value should be 0, and read value is undefined )
24
23
Tag
14
13
Rev. 2.00 Feb. 12, 2010 Page 171 of 1330
10 9
Entry
5 4 3 2 1 0
A
2
REJ09B0554-0200
U
1 0
V