HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 834

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Rev. 2.00 Feb. 12, 2010 Page 750 of 1330
REJ09B0554-0200
Bits
7
6
5
4
Bit Name
HCFS1
HCFS0
BLE
CLE
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
Description
Host Controller Functional State
HCD determines whether HC has started to route
SOF after having read the SF bit of
HcInterruptStatus. This bit can be changed by HC
only in the USB suspend state. HC can change from
the USB suspend state to the USB resume state
after having detected the resume signal from the
downstream port. In HC, USB suspend is entered
after the software reset like USB reset is entered
after the hardware reset. The former resets the root
hub.
00: USB reset state
01: USB resume state
10: USB operation state
11: USB suspend state
This bit is set to enable the processing of the bulk list
in the next frame. HC checks this bit when the
processing of the list has been determined. When
this bit is 0 (disabling), HCD can modify the list.
When HcBulkCurrentED indicates ED to be deleted,
HCD should increment the pointer by updating
HcBulkCurrentED before re-enabling the list
processing.
0: Bulk list processing is disabled in the next frame
1: Bulk list processing is enabled in the next frame
This bit is set to 1 to enable processing of the control
list in the next frame. When cleared to 0 by HCD, the
control list is not processed after the next SOF. HC
must check this bit whenever the list is to be
processed. When this bit is 0 (disabling), HCD can
modify the list. When HcControlCurrentED indicates
ED to be deleted, HCD should increment the pointer
by updating HcControlCurrentED before re-enabling
list processing.
0: Control list processing is disabled in the next
1: Control list processing is enabled in the next frame
Bulk List Enable
Control List Enable
frame