HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 688

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

17.4.2
In asynchronous mode, a character that consists of data with a start bit indicating the start of
communication and a stop bit indicating the end of communication is transmitted or received. In
this mode, serial communication is performed with synchronization achieved character by
character.
Inside the SCIF, the transmitter and receiver are independent units, enabling full-duplex
communication. Both the transmitter and receiver have a 128-stage FIFO buffer structure, so that
data can be read or written during transmission or reception, enabling continuous data
transmission and reception.
Figure 17.7 shows the general format for asynchronous serial communication.
In asynchronous serial communication, the transmission line is usually held in the mark state (high
level). The SCIF monitors the transmission line, and when it goes to the space state (low level),
recognizes a start bit and starts serial communication.
One character in serial communication consists of a start bit (low level), followed by
transmit/receive data (LSB-first; from the lowest bit), a parity bit (high or low level), and finally
stop bits (high level).
In reception in asynchronous mode, the SCIF synchronizes with the fall of the start bit. Receive
data can be latched at the middle of each bit because the SCIF samples data at the eighth clock
which has a frequency of 16 times the bit rate.
Rev. 2.00 Feb. 12, 2010 Page 604 of 1330
REJ09B0554-0200
Serial
data
Operation in Asynchronous Mode
1
Start
bit
1 bit
Figure 17.7 Data Format in Asynchronous Communication
0
(Example with 8-Bit Data, Parity, and Two Stop Bits)
LSB
D0
One unit of transfer data (character or frame)
D1
D2
Transmit/receive data
D3
7 or 8 bits
D4
D5
D6
MSB
D7
Parity
bit
1 bit or
none
0/1
Stop bit
1
1 or 2 bits
1
(mark state)
Idle state
1