HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 864

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit
15 to 10
9
8
7 to 5
4
3
2
Rev. 2.00 Feb. 12, 2010 Page 780 of 1330
REJ09B0554-0200
Bit Name
⎯
LSDA
PPS
⎯
PRS
POCI
PSS
Initial Value
All 0
0
1
All 0
0
0
0
R/W
R
W
W
R
W
W
W
Description
Reserved
Always write 0 to this bit.
Clear Port Power
HCD writes 1 to this bit to clear the PPS bit to 0.
Writing 0 has no effect.
0: Operation is not affected
1: The PPS bit is cleared to 0 and the power of the
Set Port Power
HCD writes 1 to this bit to set this bit to 1. Writing 0
has no effect.
0: Operation is not affected
1: The PPS bit is set to 1 and the power of the port
Reserved
Always write 0 to this bit.
Set Port Clear
HCD writes 1 to this bit to set the port reset signal.
Writing 0 has no effect. Clearing CCS to 0 will not
set this bit to 1 but will set CSC to 1 instead. This
informs the driver that a disconnected port is reset.
0: Operation is not affected
1: The PRS bit is set to 1
Clear Suspend Status
HCD writes 1 to this bit to initiate a resume. Writing
0 has no effect. Setting both PSS and this bit to 1
starts a resume.
0: Operation is not affected
1: Resume is started
Set Port Suspend
HCD sets this bit to 1 by writing 1. Writing 0 has no
effect. Clearing CCS to 0 does not set PSS to 1 but
sets CSC to 1 instead. It informs the driver that a
disconnected port is suspended.
0: Operation is not affected
1: The PPS bit is set to 1 and the port is
suspended
port is turned off
is turned on