HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 574

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

(11) Clock Division Register (DCKDR)
DCKDR contains control bits for the clock output from the DCK pin, on/off of PLL circuit 3,
division ratio of the DCK output clock, and enable/disable of the DCK output clock.
(12) Module Clock Control Register (MCKCR)
MCKCR contains control bits for the division ratio of the module clock.
(13) Standby Control Register (STBCR)
STBCR contains power-saving mode control bits. For further information on STBCR, see section
14, Power-Down Modes.
(14) Standby Control Register 2 (STBCR2)
STBCR2 contains power-saving mode control bits. For further information on STBCR2, see
section 14, Power-Down Modes.
12.2
Table 12.1 shows the CPG pin configuration and function.
Table 12.1 Pin Configuration and Function of an Oscillation Circuit
Note:
Rev. 2.00 Feb. 12, 2010 Page 490 of 1330
REJ09B0554-0200
Pin Name
Mode control pins
Crystal I/O pins
(clock input pins)
Clock output pins
CKIO enable pin
* Set to 1 by a power-on reset.
Input/Output Pins
Abbreviation
MD0
MD1
MD2
XTAL
EXTAL
MD8
CKIO
DCK
CKE
I/O
Input
Output
Input
Input
Output
Output
Output
Function
These bits set clock operating mode.
Connects crystal resonator.
Connects crystal resonator, or used as
external clock input pin.
Selects use/non-use of crystal resonator.
When MD8 = 0, external clock is input from
the EXTAL pin.
When MD8 = 1, crystal resonator is connected
directly to the EXTAL and XTAL pins.
Used as external clock output pins.
Level can also be fixed.
0 when CKIO output clock is unstable*.