HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 570

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

5. When activating the DMAC, make the SAR, DAR, and DMATCR settings for the relevant
6. After the DMATCR count reaches 0 and DMA transfer ends successfully, always write 0 to
7. When using falling edge detection for external requests, hold the external request pin high to
8. When using the DMAC in single address mode, specify an external address as the address.
Rev. 2.00 Feb. 12, 2010 Page 486 of 1330
REJ09B0554-0200
channel before setting the DE bit to 1 in CHCR, or make the register settings with the DE bit in
CHCR cleared to 0, then set the DE bit to 1. It does not matter whether setting of the DME bit
in DMAOR to 1 is carried out first or last. To operate the relevant channel, the DME and DE
bits must both be set to 1. The DMAC may not operate normally if the SAR, DAR, and
DMATCR settings are not made (with the exception of the unused register in single address
mode).
DMATCR even when executing the maximum number of transfers on the same channel.
make DMAC settings.
Specifying an on-chip peripheral module address causes an address error and stops transfers on
all channels.