HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 258

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

3. IC address array write (associative)
7.6.2
The IC data array is allocated to addresses H'F100 0000 to H'F1FF FFFF in the P4 area. A data
array access requires a 32-bit address field specification (when reading or writing) and a 32-bit
data field specification. The way and entry to be accessed are specified in the address field, and
the longword data to be written is specified in the data field.
In the address field, bits [31:24] have the value H'F1 indicating the IC data array, the way is
specified by bit [13], and the entry by bits [12:5]. The IIX bit in CCR has no effect on this entry
specification. Address field bits [4:2] are used for the longword data specification in the entry. As
only longword access is used, 0 should be specified for address field bits [1:0].
The data field is used for the longword data specification.
Rev. 2.00 Feb. 12, 2010 Page 174 of 1330
REJ09B0554-0200
When a write is performed with the A bit in the address field set to 1, the tag for each of the
ways stored in the entry specified in the address field is compared with the tag specified in the
data field. The way number set by bit [13] is not used. If the MMU is enabled at this time,
comparison is performed after the virtual address specified by data field bits [31:10] has been
translated to a physical address using the ITLB. If the addresses match and the V bit for that
way is 1, the V bit specified in the data field is written into the IC entry. In other cases, no
operation is performed. This operation is used to invalidate a specific IC entry. If an ITLB miss
occurs during address translation, or the comparison shows a mismatch, an exception is not
generated, no operation is performed, and the write is not executed. If an instruction TLB
multiple hit exception occurs during address translation, processing switches to the instruction
TLB multiple hit exception handling routine.
IC Data Array
Address field
Data field
31
31
V
A
1 1 1 1 0 0 0 0
Figure 7.9 Memory-Mapped IC Address Array
: Validity bit
: Association bit
: Reserved bits (write value should be 0, and read value is undefined )
24
23
Tag
14
Way
13
12
10 9
Entry
5 4 3 2 1 0
A
1 0
V